Achieving - PowerPoint PPT Presentation

About This Presentation
Title:

Achieving

Description:

Achieving Zero Waste with Plasma Arc Technology Louis J. Circeo, Ph.D. Director, Plasma Applications Research Program Robert C. Martin, Jr. Michael E. Smith – PowerPoint PPT presentation

Number of Views:146
Avg rating:3.0/5.0
Slides: 38
Provided by: lakecount1
Category:

less

Transcript and Presenter's Notes

Title: Achieving


1
Achieving Zero WastewithPlasma Arc Technology
  • Louis J. Circeo, Ph.D.
  • Director, Plasma Applications Research Program
  • Robert C. Martin, Jr.
  • Michael E. Smith

Electro-Optics, Environment and Materials
Laboratory
2
Achieving Zero Waste
  • Plasma arc technology offers a unique opportunity
    to achieve the zero waste goal by providing the
    capability to eliminate the need for land
    disposal of many hazardous wastes and to recover
    energy from municipal solid wastes and other
    organic wastes while producing salable byproducts
    and eliminating requirements for landfilling of
    ash or other residual materials.

3
What is PLASMA?
  • Fourth State of matter
  • Ionized gas at high temperature capable of
    conducting electrical current
  • Lightning is an example from nature

4
Non-transferred arc plasma torch
In a plasma arc torch, the plasma gas serves as a
resistive heating element to convert electricity
into heat. Because it is a gas and cannot melt,
temperatures in excess of 7000C can be produced.
5
Plasma torch in operation
6
Characteristics of Plasma Arc Technology
  • Plasma acts as a resistive heating element that
    cannot melt and fail
  • Produces temperatures of 4,000C to over 7,000C
  • Torch power levels from 100kW to 200 MW produce
    high energy densities (up to 100 MW/m3)
  • Torch operates with most gases not a combustion
    process
  • Elimination of requirement for combustion air
  • Reduces gas volume requiring treatment
  • Reduces potential for formation of complex
    organics (i.e., dioxins and furans)

7
Plasma arc technology is ideally suited for waste
treatment
  • Hazardous toxic compounds broken down to
    elemental constituents by high temperatures
  • Organic materials
  • Pyrolyzed or volatilized
  • May be converted to fuel gases
  • Amenable to conventional off-gas treatment
  • Residual materials (radionuclides, heavy metals,
    etc.) immobilized in a rock-like vitrified mass
    which is highly resistant to leaching

8
Plasma arc technology remediation experience
  • Heavy metals
  • Radioactive wastes
  • Industrial sludges
  • Municipal solid waste
  • Electric arc furnace dust
  • Liquid/solid organic wastes
  • PCBs
  • Asbestos
  • Chemical wastes
  • Medical wastes
  • Plastics
  • Used tires

9
Waste Processing ApplicationsofPlasma Arc
Technology
Waste Destruction
Energy/Material Recovery
10
Waste Destruction Applications
  • Melting and vitrification of inorganic materials
  • Pyrolysis of organic materials
  • Molten metal or glass bath provides heat transfer
  • Heat causes breakdown of complex materials into
    elemental components
  • Rapid quenching prevents complex compound
    formation (dioxins and furans)
  • Water gas shift reaction to remove carbon
  • C H2O ? H2 CO
  • Gaseous products are fuel and simple acid gases
  • Vitreous residue is resistant to leaching
    suitable for aggregate

11
U.S. asbestos stockpile disposal
12
French Asbestos-Containing Materials (ACM)
disposal system
13
Incinerator ash disposal
14
Navy shipboard system
15
Navy Shipboard System contd
16
Recent Commercial Applications
  • Mixed waste treatment facility-Richland, WA
  • Allied Technology Group (ATG)
  • Medical waste vitrification facility-Honolulu, HI
  • Asia Pacific Environmental Technologies (APET)
  • Incinerator ash vitrification facilities Europe
    and Japan
  • Europlasma
  • IHI Inc./Westinghouse Plasma

17
Recent DoD Plasma Furnace Applications
  • Plasma Arc Shipboard Waste Destruction System
    (PAWDS)
  • U.S. Navy Warships (NSWCCD)
  • Plasma Arc Hazardous Waste Treatment System
    (PAHWTS)
  • U.S. Naval Base, Norfolk, VA (Office of Naval
    Research, Environmentally Sound Ships Program)
  • Plasma Ordnance Demilitarization System (PODS)
  • Naval Surface Warfare Center, Crane, IN (Defense
    Ammunition Center)

18
Recent DoD Plasma Furnace Applications contd
  • Plasma Waste Treatment System (Pyrotechnics and
    Energetics)
  • Hawthorne Army Ammunition Plant, NV (Armament
    Research and Development Engineering Center)
  • Plasma Energy Pyrolysis System (PEPS)
    Demonstration Facility (Medical Waste and Blast
    Media), Lorton, VA
  • U.S. Army Construction Engineering Research
    Laboratories (CERL)
  • Mobile PEPS Demonstration System, U. S. Army CERL

19
Mobile Plasma Energy Pyrolysis System (PEPS)
20
GaTech Plasma Waste Processing Demonstration
System
  • Developed by USACERL
  • Congressional funding
  • Cost 6 Million
  • Capacity 10 tons/day
  • Complete system
  • Feed Tapping
  • Furnace
  • Emissions control
  • Wastewater treatment
  • 1MW mobile generator

21
Georgia Tech Plasma Waste Processing and
Demonstration System
22
Plasma Processing for Energy and Materials
Recovery
  • Research on waste destruction noted that
    pyrolysis produced useful fuel gases and inert
    residuals from organic wastes including MSW
  • Relatively high plasma energy requirements (600
    kWh/ton) and capital cost of complex molten bath
    reactors limited economic feasibility of
    pyrolysis processes
  • Use of gasification technology has made plasma a
    more economically attractive alternative

23
Plasma Pyrolysis of MSW
Gas Heating Value OutputElectricity Input
4.30
Product Gas30,300 SCFHeating Value 8.16 MBTU
Based on data from Resorption Canada, Ltd.
1995(Summarized and converted to English units)
24
Hitachi Metals Plasma MSW System Japan
25
Hitachi Metals200 TPD MSW Plant - Utashinai Japan
26
Hitachi MetalsUtashinai, Japan Plant
  • Commercial 200 ton/day plasma processing system
  • Designed for Municipal Solid Waste (MSW) and
    Automobile Shredder Residue (ASR)
  • Represents MSW from approximately 30,000 US
    households
  • Plant has two plasma reactors
  • Four 300 kW torches (Westinghouse Plasma Corp.)
    per reactor
  • Each reactor will process 4 tons/hr
  • Generates 7.9 MW of electricity (4.3 MW to grid)
  • Could supply 4,000 US households with electricity
    (up to 15 of households supplying waste to the
    system)
  • Fully operational in April 2003

27
Vitrified MSW residue
28
Leachability of Vitrified MSW Residue (TCLP)
Metal Permissible concentration (mg/l) Measured Concentration (mg/l)
Arsenic 5.0 lt0.1
Barium 100.0 lt0.5
Cadmium 1.0 lt0.02
Chromium 5.0 lt0.2
Lead 5.0 lt0.2
Mercury 0.2 lt0.01
Selenium 1.0 lt0.1
Silver 5.0 lt0.5
29
MSW Solid Byproduct Uses
Molten Stream Processing(Product)
Air Cooling(Gravel)
Water Cooling(Sand)
Water Cooling(Metal Nodules)
Air Blown(Rock Wool)
Salable Product Uses
Coarse Aggregate (roads, concrete, asphalt)
Fine Aggregate (concrete, asphalt, concrete products)
Recyclable metals
Insulation, sound proofing, agriculture
30
PLASMA PROCESSING OF MSW AT COAL-FIRED POWER
PLANTS
  • Concept
  • Collocate MSW plasma processing plants (in
    modules of 1,000 TPD) with existing operational
    coal-fired power plants.
  • The amount of coal supplied to a plant will be
    reduced, proportionate to the thermal output of
    the MSW plant.
  • The hot gaseous emissions from the plasma plant
    afterburner system will be fed directly into the
    coal plant combustion chamber to supplement the
    combusted coal gases.
  • The combined plasma and coal gaseous emissions
    would produce steam and power equal to the normal
    coal plant generating capacity.
  • MSW would replace large volumes of coal for
    power generation in a very efficient,
    cost-effective and environmentally cleaner
    operation.

31
PLASMA PROCESSING OF MSW AT COAL-FIRED POWER
PLANTS
  • Reduced Capital Costs of MSW Plant(1)
  • Use existing power plant facilities
  • Steam generation system
  • Off gas treatment system
  • Electrical generating system
  • Use existing transportation network
  • Build on power plant land, if feasible
  • (1) Geoplasma, LLC estimated costs

32
PLASMA PROCESSING OF MSW AT COAL-FIRED POWER
PLANTS
  • Summary
  • By 2020, if all MSW was processed by plasma at
    coal-fired power plants (1 million TPD), MSW
    could
  • Supply about 5 of U.S. electricity needs
  • Replace about 140 million TPY of coal
  • Eliminate about 15 million TPY of coal ash
    going to landfills
  • Provide significantly cleaner coal plant air
    emissions
  • Support the goals of the Clear Skies Act

33
YEAR 2020SELECTED RENEWABLE ENERGY SOURCES
  • Source Quads
  • (1015 BTU)
  • Plasma Processed MSW(1) 0.90
  • Geothermal(2) 0.47
  • Landfill Gas(2) 0.12
  • Solar(2) 0.09
  • Wind(2) 0.04
  • _____________________
  • Assumes 1 million TPD
  • Extrapolated from 1999 statistics

34
Capital Costs Incineration vs Plasma
Gasification Facilities
(Note Plasma Costs are Geoplasma LLC Estimates)
35
Potential DoD Applications
  • Processing of hazardous wastes
  • Major installations
  • Industrial activities (depots, Air Force Plants)
  • Bare Base and Zero Footprint Operations
  • Process solid and sanitary wastes
  • Eliminate landfill or shipping of residuals
  • Recovery of energy as steam or hot water

36
Barriers to implementation of Plasma Arc
Technology
  • Successful commercial applications in US
  • Regulatory acceptance and permitting
  • Public acceptance

37
For More Information
  • Contact
  • Lou Circeo lou.circeo_at_gtri.gatech.edu
    (404-894-2070)
  • Bob Martin bob.martin_at_gtri.gatech.edu
    (404-894-8446)
  • Mike Smith mike.smith_at_gtri.gatech.edu
  • (404-894-0281)

Georgia Tech Research Institute EOEML/SHETD/ETB 43
0 Tenth Street NW Atlanta, GA 30332-0837
Write a Comment
User Comments (0)
About PowerShow.com