CCNA 1

1
CCNA 1
v3
JEOPARDY

• Module 8

S Dow
2
Router Modes
WAN Encapsulation
WAN Services
Router Basics
Router Commands
Router Modes
WAN Encapsulation
WAN Services
Router Basics
Router Commands
Acronyms
Terms
Switching
STP
Segmentation
OSI
? ? ? F i n a l J e o p a r d y ? ? ?
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
300
300
300
300
300
300
300
300
400
400
400
400
400
400
400
400
500
500
500
500
500
500
500
500
3
Acronyms100
CAM
A What is Content Addressable Memory?
CCNA1 v3 Module 8
4
Acronyms200
ASIC
A What is Application-Specific Integrated
Circuit?
CCNA1 v3 Module 8
5
Acronyms300
STP
A What is the Spanning Tree Protocol?
CCNA1 v3 Module 8
6
Acronyms400
BPDU
A What is a Bridge Protocol Data Unit?
CCNA1 v3 Module 8
7
Acronyms500
STA
A What is the Spanning Tree Algorithm?
CCNA1 v3 Module 8
8
Terms100
The time from when a frame is sent until it is
received at its final destination.
A What is Latency?
CCNA1 v3 Module 8
9
Terms 200
Data sent to all devices in a network.
A What is a Broadcast?
CCNA1 v3 Module 8
10
Terms 300
The result of two devices sending data
simultaneously over shared media.
A What is a Collision?
CCNA1 v3 Module 8
11
Terms 400
All of the devices affected when two devices send
data simultaneously over shared media.
A What is a Collision Domain?
CCNA1 v3 Module 8
12
Terms 500
All of the devices that receive an ARP request.
A What is a a Broadcast Domain?
CCNA1 v3 Module 8
13
Switching100
This switching mode receives the entire frame
before forwarding.
A What is the Store and Forward switching mode?
CCNA1 v3 Module 8
14
Switching 200
This switching mode begins forwarding as soon as
the destination MAC address has been received.
A What is the Cut Through switching mode?
CCNA1 v3 Module 8
15
Switching 300
This type of switching permits connections
between ports of unlike bandwidth.
A What is Asymmetric switching?
CCNA1 v3 Module 8
16
Switching 400
This switching mode begins forwarding frames only
after the first 64 bytes have been received.
A What is the Fragment Free switching mode?
CCNA1 v3 Module 8
17
Switching 500
This type of switching occurs only between ports
using the same bandwidth.
A What is Symmetric switching?
CCNA1 v3 Module 8
18
STP100
The purpose of the Spanning Tree Protocol.
A What is To avoid switching loops (multiple
paths) in a network, which could lead to
broadcasts using all of the bandwidth on the
network?
CCNA1 v3 Module 8
19
STP 200
In this STP state, a switch port can only receive
switch information (BPDUs) from other switches,
but cannot forward user data.
A What is the Blocking state?
CCNA1 v3 Module 8
20
STP 300
In this STP state, a switch port is not
forwarding data, but does build a bridging table
of end-station MAC addresses.
A What is the Learning state?
CCNA1 v3 Module 8
21
STP 400
In this STP state, a switch port can send all
frames.
A What is the Forwarding state?
CCNA1 v3 Module 8
22
STP 500
In this STP state, a switch port does not process
any frames or BPDUs.
A What is the Disabled state?
CCNA1 v3 Module 8
23
Segmentation100
The purpose of segmenting a network.
A What is To increase the efficiency of a
network by decreasing the number of collisions
and broadcasts?
CCNA1 v3 Module 8
24
Segmentation 200
Placing a switch in a network creates these.
A What are Collision Domains?
CCNA1 v3 Module 8
25
Segmentation 300
Placing a router in a network creates these.
A What are Broadcast Domains?
CCNA1 v3 Module 8
26
Segmentation 400
The effect a switch has on broadcasts.
A What is Switches have no limiting effect on
broadcasts?
CCNA1 v3 Module 8
27
Segmentation 500
The effect broadcasts have on a computer.
A What is Slows down the operation of a computer
the CPU must process each packet to determine
if the computer is the intended destination?
CCNA1 v3 Module 8
28
OSI100
Layer 1 devices filter frames based upon this
address.
A What is Layer 1 devices do NOT filter?
CCNA1 v3 Module 8
29
OSI 200
Layer 2 devices filter frames based upon this
address.
A What is a MAC address?
CCNA1 v3 Module 8
30
OSI 300
Layer 3 devices filter packets based upon this
address.
A What is an IP address?
CCNA1 v3 Module 8
31
OSI 400
Creation of collision domains generally occurs at
this layer.
A What is the Data Link Layer (2)? (Layer 3
devices can also do this).
CCNA1 v3 Module 8
32
OSI 500
Creation of broadcast domains occurs at this OSI
layer.
A What is Network Layer (3)?
CCNA1 v3 Module 8
33
Final Jeopardy
The number of broadcast domains when two switch
ports are each connected to a hub and each hub is
connected to four computers.
A When is a single broadcast domain?
CCNA1 v3 Module 8