Chapter 3. Aggregate Planning (Steven Nahmias) - PowerPoint PPT Presentation

1 / 54
About This Presentation
Title:

Chapter 3. Aggregate Planning (Steven Nahmias)

Description:

Chapter 3. Aggregate Planning (Steven Nahmias) * Why again did we pick on March? Examining the graph we see that that was the Trigger point where our constant ... – PowerPoint PPT presentation

Number of Views:528
Avg rating:3.0/5.0
Slides: 55
Provided by: homesIeu9
Category:

less

Transcript and Presenter's Notes

Title: Chapter 3. Aggregate Planning (Steven Nahmias)


1
Chapter 3. Aggregate Planning(Steven Nahmias)
2
Hierarchy of Production Decisions
Long-range Capacity Planning
3
Planning Horizon
  • Aggregate planning Intermediate-range capacity
    planning, usually covering 2 to 12 months.

4
Aggregate Planning Strategies
  • Should inventories be used to absorb changes in
    demand during planning period?
  • Should demand changes be accommodated by varying
    the size of the workforce?
  • Should part-timers be used, or should overtime
    and/or machine idle time be used to absorb
    fluctuations?
  • Should subcontractors be used on fluctuating
    orders so a stable workforce can be maintained?
  • Should prices or other factors be changed to
    influence demand?

5
Introduction to Aggregate Planning
  • Goal To plan gross work force levels and set
    firm-wide production plans so that predicted
    demand for aggregated units can be met.
  • Concept is predicated on the idea of an
    aggregate unit of production. May be actual
    units, or may be measured in weight (tons of
    steel), volume (gallons of gasoline), time
    (worker-hours), or dollars of sales. Can even be
    a fictitious quantity. (Refer to example in text
    and in slide below.)

6
Why Aggregate Planning Is Necessary
  • Fully load facilities and minimize overloading
    and underloading
  • Make sure enough capacity available to satisfy
    expected demand
  • Plan for the orderly and systematic change of
    production capacity to meet the peaks and valleys
    of expected customer demand
  • Get the most output for the amount of resources
    available

7
Aggregation Method Suggested by Hax and Meal
  • They suggest grouping products into three
    categories
  • items, families, and types.
  • Items are the finest level in the product
    structure and correspond to individual
    stock-keeping units. For example, a firm selling
    refrigerators would distinguish white from almond
    in the same refrigerator as different items.
  • A family in this context would be refrigerators
    in general.
  • Types are natural groupings of families kitchen
    appliances might be one type.

8
Aggregate Planning
  • Aggregate planning might also be called macro
    production planning.
  • Whether a company provides a service or product,
    macro planning begins with the forecast of
    demand.
  • Aggregate planning methodology is designed to
    translate demand forecasts into a blueprint for
    planning
  • - staffing and
  • - production levels
  • for the firm over a predetermined planning
    horizon.

9
Aggregate Planning
  • The aggregate planning methodology discussed in
    this chapter assumes that the demand is
    deterministic
  • This assumption is made to simplify the analysis
    and allow us to focus on the systematic and
    predictable changes in the demand pattern.
  • Aggregate planning involves competing objectives
  • - react quickly to anticipated changes in
    demand
  • - retaining a stable workforce
  • - develop a production plan that maximizes
    profit over the planning horizon subject to
    constraints on capacity

10
Steps in Aggregate Planning
  • Prepare the sales forecast (Note that all
    producting planning activities begin with sales
    forecast)
  • Total all the individual product or service
    forecasts into one aggregate demand (if not
    homogeneous use labor-hours, machine-hours or
    sales dollars)
  • Transform the aggregate demand into worker,
    material and machine requirements
  • Develop alternative capacity plans
  • Select a capacity plan which satisfies aggregate
    demand and best meets the objectives of the
    organization.

11
Overview of the Problem
  • Suppose that D1, D2, . . . , DT are the forecasts
    of demand for aggregate units over the planning
    horizon (T periods.) The problem is to determine
    both work force levels (Wt) and production levels
    (Pt ) to minimize total costs over the T period
    planning horizon.

12
Important Issues in Aggregate Planning
  • Smoothing. Refers to the costs and disruptions
    that result from making changes in production and
    workforce levels from one period to the next
    (cost of hiring and firing workers).
  • Bottleneck Planning. Problem of not meeting the
    peak demand because of capacity restrictions. A
    bottleneck occurs when the capacity of the
    productive system is insufficient to meet a
    sudden surge in the demand. Bottlenecks can also
    occur in a particular part of the productive
    system due to the breakdown of a key piece of
    equipment or the shortage of a critical resource.

13
Important Issues in Aggregate Planning
  • Planning Horizon. The planning horizon is the
    number of periods of demand forecast used to
    generate the aggregate plan. If the horizon is
    too short, there may be insufficient time to
    build inventories to meet future demand surges
    and if it is too long the reliability of the
    demand forecasts is likely to be low. (in
    practice, rolling schedules are used)
  • Treatment of Demand. Assume demand is known.
    Ignores uncertainty to focus on the
    predictable/systematic variations in demand, such
    as seasonality.

14
Relevant Costs
  • Smoothing Costs
  • changing size of the work force
  • changing number of units produced
  • Holding Costs
  • primary component opportunity cost of investment
    in inventory
  • Shortage Costs
  • Cost of demand exceeding stock on hand.
  • Other Costs payroll, overtime, subcontracting.

15
Cost of Changing the Size of the Workforce
Fig. 3-2
16
Holding and Back-Order Costs
Fig. 3-3
17
Aggregate Units
  • The method is based on notion of aggregate units.
    They may be
  • Actual units of production
  • Weight (tons of steel)
  • Volume (gallons of gasoline)
  • Dollars (Value of sales)
  • Fictitious aggregate units(See example 3.1)

18
Example of fictitious aggregate units.(Example
3.1)
  • One plant produced 6 models of washing machines
  • Model hrs. Price
    sales
  • A 5532 4.2 285 32
  • K 4242 4.9 345 21
  • L 9898 5.1 395 17
  • L 3800 5.2 425 14
  • M 2624 5.4 525 10
  • M 3880 5.8 725 06
  • Question How do we define an aggregate unit here?

19
Example continued
  • Notice Price is not necessarily proportional to
    worker hours (i.e., cost) why?
  • One method for defining an aggregate unit
    requires .32(4.2) .21(4.9) . . . .06(5.8)
    4.8644 worker hours. This approach for this
    example is reasonable since products produced are
    similar. When products produced are
    heterogeneous, a natural aggregate unit is sales
    dollars.

20
Prototype Aggregate Planning Example(this
example is not in the text)
  • The washing machine plant is interested in
    determining work force and production levels for
    the next 8 months. Forecasted demands for
    Jan-Aug. are 420, 280, 460, 190, 310, 145, 110,
    125. Starting inventory at the end of December is
    200 and the company would like to have 100 units
    on hand at the end of August. Find monthly
    production levels.

21
Step 1 Determine net demand.(subtract
starting inventory from period 1 forecast and add
ending inventory to period 8 forecast.)
  • Month Net Predicted Cum. Net
  • Demand
    Demand
  • 1(Jan) 220 220
  • 2(Feb) 280 500
  • 3(Mar) 460 960
  • 4(Apr) 190 1150
  • 5(May) 310 1460
  • 6(June) 145 1605
  • 7(July) 110 1715
  • 8(Aug) 225 1940

22
Step 2. Graph Cumulative Net Demand to Find Plans
Graphically
23
Basic Strategies
  • Constant Workforce (Level Capacity) strategy
  • Maintaining a steady rate of regular-time output
    while meeting variations in demand by a
    combination of options.
  • Zero Inventory (Matching Demand)strategy
  • Matching capacity to demand the planned output
    for a period is set at the expected demand for
    that period.

24
Constant Workforce Approach
  • Advantages
  • Stable output rates and workforce
  • Disadvantages
  • Greater inventory costs
  • Increased overtime and idle time
  • Resource utilizations vary over time

25
Zero Inventory Approach
  • Advantages
  • Investment in inventory is low
  • Labor utilization is high
  • Disadvantages
  • The cost of adjusting output rates and/or
    workforce levels

26
Constant Work Force Plan
  • Suppose that we are interested in determining
    a production plan that doesnt change the size of
    the workforce over the planning horizon. How
    would we do that?
  • One method In previous picture, draw a
    straight line from origin to 1940 units in month
    8 The slope of the line is the number of units
    to produce each month.

27
Monthly Production 1940/8 242.2 or rounded to
243/month. But there are stockouts.
28
How can we have a constant work force plan with
no stockouts?
  • Answer using the graph, find the straight line
    that goes through the origin and lies completely
    above the cumulative net demand curve

29
From the previous graph, we see that cum. net
demand curve is crossed at period 3, so that
monthly production is 960/3 320. Ending
inventory each month is found from
  • Month Cum. Net. Dem. Cum. Prod.
    Invent.
  • 1(Jan) 220 320 100
  • 2(Feb) 500 640
    140
  • 3(Mar) 960 960
    0
  • 4(Apr.) 1150 1280
    130
  • 5(May) 1460 1600
    140
  • 6(June) 1605 1920
    315
  • 7(July) 1715 2240
    525
  • 8(Aug) 1940 2560
    620

30
But - may not be realistic for several reasons
  • It may not be possible to achieve the production
    level of 320 unit/mo with an integer number of
    workers
  • Since all months do not have the same number of
    workdays, a constant production level may not
    translate to the same number of workers each
    month.

31
To Overcome These Shortcomings
  • Assume number of workdays per month is given
    (reasonable!)
  • Compute a K factor given by
  • K number of aggregate units produced by one
    worker in one day

32
Finding K
  • Suppose that we are told that over a period of 40
    days, the plant had 38 workers who produced 520
    units. It follows that
  • K 520/(3840) .3421
  • average number of units produced by one
    worker in one day.

33
Computing Constant Work Force -- Realistically
  • Assume we are given the following working days
    per month 22, 16, 23, 20, 21, 22, 21, 22.
  • March is still the critical month.
  • Cum. net demand thru March 960.
  • Cum working days 221623 61.
  • We find that
  • 960/61 15.7377 units/day
  • 15.7377/.3421 46 workers required
  • Actually 46.003 here we truncate because we are
    set to build inventory so the low number should
    work (check for March stock out) however we
    must use care and typically round up any
    fractional worker calculations thus building more
    inventory

34
Why again did we pick on March?
  • Examining the graph we see that that was the
    Trigger point where our constant production
    line intersected the cumulative demand line
    assuring NO STOCKOUTS!
  • Can we prove this is best?

35
Tabulate Days/Production Per Worker Vs. Demand To
Find Minimum Numbers
36
What Should We Look At?
  • Cumulative Demand says March needs most workers
    but will mean building inventories in Jan Feb
    to fulfill the greater March demand
  • If we keep this number of workers we will
    continue to build inventory through the rest of
    the plan!

37
Constant Work Force Production Plan
  • Mo wk days Prod. Cum Cum Nt
    End Inv
  • Level
    Prod Dem
  • Jan 22 346 346
    220 126
  • Feb 16 252 598
    500 98
  • Mar 23 362 960
    960 0
  • Apr 20 315 1275
    1150 125
  • May 21 330 1605
    1460 145
  • Jun 22 346 1951
    1605 346
  • Jul 21 330 2281
    1715 566
  • Aug 22 346 2627
    1940 687

38
Addition of Costs
  • Holding Cost (per unit per month) 8.50
  • Hiring Cost per worker 800
  • Firing Cost per worker 1,250
  • Payroll Cost 75/worker/day
  • Shortage Cost 50 unit short/month

39
Cost Evaluation of Constant Work Force Plan
  • Assume that the work force at the end of Dec was
    40.
  • Cost to hire 6 workers 6800 4800
  • Inventory Cost accumulate ending inventory
    (126980. . .687) 2093. Add in 100 units
    netted out in Aug 2193. Hence Inv. Cost
    21938.518,640.50
  • Payroll cost
  • (75/worker/day)(46 workers )(167days) 576,150
  • Cost of plan 576,150 18,640.50 4800
    599,590.50

40
Cost Reduction in Constant Work Force Plan(Mixed
Strategy)
  • In the original cum net demand curve, consider
    making reductions in the work force one or more
    times over the planning horizon to decrease
    inventory investment.

41
Zero Inventory Plan (Chase Strategy)
  • Here the idea is to change the workforce each
    month in order to reduce ending inventory to
    nearly zero by matching the workforce with
    monthly demand as closely as possible. This is
    accomplished by computing the of units produced
    by one worker each month (by multiplying K by
    days per mo.) and then taking net demand each
    month and dividing by this quantity. The
    resulting ratio is rounded up to avoid shortages.

42
An Alternative is called the Chase Plan
  • Here, we hire and fire (layoff) workers to keep
    inventory low!
  • We would employ only the number of workers needed
    each month to meet demand
  • Examining our chart (earlier) we need
  • Jan 30 Feb 51 Mar 59 Apr 27 May 43 Jun
    20 Jul 15 Aug 30
  • Found by (monthly demand) ? (monthly pr. /worker)

43
An Alternative is called the Chase Plan
  • So we hire or Fire (lay-off) monthly
  • Jan (starts with 40 workers) Fire 10 (cost
    8000)
  • Feb Hire 21 (cost 16800)
  • Mar Hire 8 (cost 6400)
  • Apr Fire 31 (cost 38750)
  • May Hire 15 (cost 12000)
  • Jun Fire 23 (cost 28750)
  • Jul Fire 5 (cost 6250)
  • Aug Hire 15 (cost 12000)
  • Total Personnel Costs 128950

44
  • I got the following for this problem
  • Period hired fired
  • 1 10
  • 2 21
  • 3 8
  • 4 31
  • 5 15
  • 6 24
  • 7 4
  • 8 15

45
An Alternative is called the Chase Plan
  • Inventory cost is essentially 1658.5 1402.50
  • Employment costs 428325
  • Chase Plan Total 558677.50
  • Betters the Constant Workforce Plan by
  • 599590.50 558677.50 40913
  • But will this be good for your image?
  • Can we find a better plan?

46
Disaggregating The Aggregate Plan
  • Disaggregation of aggregate plans mean converting
    an aggregate plan to a detailed master production
    schedule for each individual item (remember the
    hierarchical product structure given earlier
    items, families, types).
  • Keep in mind that unless the results of the
    aggregate plan can be linked to the master
    production schedule, the aggregate planning
    methodology could have little value.

47
Aggregate Plan to Master Schedule
48
Optimal Solutions to Aggregate Planning Problems
Via Linear Programming
  • Linear Programming provides a means of solving
    aggregate planning problems optimally. The LP
    formulation is fairly complex requiring 8T
    decision variables(1.workforce level, 2.
    production level, 3. inventory level, 4. of
    workers hired, 5. of workres fired, 6. overtime
    production, 7. idletime, 8. subcontracting) and
    3T constraints (1. workforce, 2. production, 3.
    inventory), where T is the length of the planning
    horizon. (See section 3.5, pg.125)

49
Optimal Solutions to Aggregate Planning Problems
Via Linear Programming
  • Clearly, this can be a formidable linear program.
    The LP formulation shows that the modified plan
    we considered with two months of layoffs is in
    fact optimal for the prototype problem.
  • Refer to the latter part of Chapter 3 and the
    Appendix following the chapter for details.

50
Exploring the Optimal (L.P.) Approach
  • We need an Objective Function for cost of the
    aggregate plan (target is to minimize
    costs)
  • Here the cis are cost for hiring, firing,
    inventory, production, etc
  • HT and FT are number of workers hired and fired
  • IT, PT, OT, ST AND UT are numbers units
    inventoried, produced on regular time, on
    overtime, by sub-contract or the number of
    units that could be produced on idled worker
    hours respectively

51
Exploring the Optimal (L.P.) Approach
  • This objective Function would be subject to a
    series of constraints (one of each type for each
    period)
  • Number of Workers Constraints
  • Inventory Constraints
  • Production Constraints

Where nt k is the number of units produced by
a worker in a given period of nt days
52
Real Constraint Equation (rewritten for L.P.)
  • Employee Constraints
  • Inventory Constraints

53
Real Constraint Equations (rewritten for L.P.)
  • Production Constraints

54
Real Constraint Equations (rewritten for L.P.)
  • Finally, we need constraints defining
  • Initial Workforce size
  • Starting Inventory
  • Final Desired Inventory
  • And, of course, the general constraint forcing
    all variables to be ? 0
Write a Comment
User Comments (0)
About PowerShow.com