ADVANCED RADAR APPLICATIONS IN METEOROLGY - PowerPoint PPT Presentation

About This Presentation
Title:

ADVANCED RADAR APPLICATIONS IN METEOROLGY

Description:

ADVANCED RADAR APPLICATIONS IN METEOROLGY Nurg l Ertem 110000531 Radar in Meteorology Radar stands for Radio Detection and Ranging. It refers to the use of radio ... – PowerPoint PPT presentation

Number of Views:1861
Avg rating:3.0/5.0
Slides: 36
Provided by: webItuEd8
Category:

less

Transcript and Presenter's Notes

Title: ADVANCED RADAR APPLICATIONS IN METEOROLGY


1
ADVANCED RADAR APPLICATIONS IN METEOROLGY
  • Nurgül Ertem
  • 110000531

2
Radar in Meteorology
  • Radar stands for Radio Detection and Ranging. It
    refers to the use of radio waves to detect
    objects and determine the distance (range) to the
    object.
  • Radars, however, will be our focus here. They
    have particularly become important in meteorology
    because of the following reasons.
  • (i) They can see through fog, cloud, rain and
    other types of atmospheric conditions which light
    cannot pass through.
  • (ii) They can observe many places in the sky
    almost simultaneously.
  • (iii) They can run continuously, often without
    operators being present (computer controlled).
  • (iv) They can operate during both day and night.
  • (v) The data from them can be easily stored to
    computer and then subjected to many types of
    sophisticated analysis.
  • (vi) Modern solid-state radars often need little
    maintenance, or replacement of parts, so the
    largest expense is often the setup costs.
  • (vii) Radars are not restricted to ground-level
    studies, and can often observe several kilometres
    upward into the atmosphere

3
Signal Processing and Product Generation
  • The processing of radar data generally involve
    two distinct steps. The first step, called signal
    processing, is the extraction of raw radar
    parameters like echo strength (reflectivity) or
    Doppler velocity from the radar signals coming
    out of the receiver. The second step, called data
    processing or product generation, is the further
    processing of raw radar parameters in order to
    obtain information that is useful for
    meteorological or hydrological purposes. In
    general, these two steps are done by different
    computers, signal processing being done at the
    radar site, while product generation can be done
    everywhere the data are sent to.

4
Simple Radar System
antenna
transmitter 106 W
display
T/R switch
receiver 10-14 W
5
Radar System
  • Transmitter--produces high power pulses at
    desired frequency. Pulses may be 1 microsecond
    in duration.
  • Receiver--detects, amplifies and converts
    (digitizes) received voltages from each
    pulse as a function of range
  • Antenna--radiates transmitted power in narrow
    beam for maximum gain
  • --receives backscattered signal
    from targets
  • T/R switch--switches antenna between transmitter
    and receiver at high rate, typically once every
    millisecond
  • Receivers are designed to detect very weak
    signals, on the order of 10-13 to 10-14 watts.
    Transmitted power is typically 106 watts, peak
    power.

6
Radar Systems
  • More advanced radars provide either frequency
    agility or polarization agility.
  • Frequency agility--transmit and receive multiple
    frequencies (near in frequency to each other) to
    increase sampling rate
  • Polarization agility--alternatively transmit
    either horizontal or vertical polarization to
    provide wealth of information on particle phase,
    shape and orientation

7
  • Sending and Receiving Signals
  • detecting a target
  • The radar creates an electromagnetic energy pulse
    which is focused by an antenna and transmitted
    through the atmosphere. Objects in the path of
    this electromagnetic pulse, called targets,
    scatter the electromagnetic energy. Some of that
    energy is scattered back toward the radar.
  • The receiving antenna (which is normally also the
    transmitting antenna) gathers this back-scattered
    radiation and feeds it to a device called a
    receiver.

8
RADAR
  • Radar weather information are used to determine
    current atmospheric conditions, but
    meteorologists must integrate data from many
    sources to get a complete and accurate picture of
    atmospheric conditions. Meteorologists feed
    current data into computer models to help them
    predict weather conditions (forecast) and make
    critical decisions
  • Radar could be used to answer the following
    questions about the line of precipitation. What
    is the intensity of the precipitation (in this
    case snow)? What direction and at what speed are
    the snow bands moving? Will the snow bands become
    stronger or weaker?

9
COLORED RADAR
  • The location of the colored radar echoes indicate
    where precipitation is falling and the various
    colors indicate the intensity of the
    precipitation through the color code in the lower
    left corner of the image.
  • The example radar image above shows several
    strong thunderstorms moving through Illinois and
    Indiana on April 20, 1996. Regions of light and
    dark blue indicate regions of lighter
    precipitation while areas of red and pink
    indicate strong, to occasionally severe
    thunderstorms. Normally, it is difficult to
    distinguish precipitation type on the basis of
    the radar reflectivity alone. Snow and light
    drizzle both produce radar reflectivity with
    about the same value. Melting snow and moderate
    rain also have similar values. Very high
    reflectivities (the grays on the scale on the
    image above) are always associated with hail.

10
Radar in meteorology
  • Weather radars play a vital role in short term
    weather forecasting and for meteorological
    research. They are being used routinely in
    meteorology to monitor storms and follow their
    evolution, as well as observe winds and detect
    regions where severe weather might
  • develop. Specialists in radar meteorology, with
    backgrounds in meteorology, engineering, and
    computer science, work to improve the use of
    radar as a meteorological instrument.
  • For example, our large S-band Doppler radar is
    used for weather surveillance around the Montreal
    area. Part of the Canadian radar network, it is
    used by the local weather office to monitor
    weather in real-time. Its data are used in a
    variety of applications, from severe weather
    detection to sewer flow forecasting.

11
  • How Does Radar Work?

Return back
single antenna
target
send
short pulses of energy
The antenna rotates about a vertical axis,
scanning the horizon in all directions
12
Radar - How Radar Works
  • Radar works by transmitting a pulse of
    electromagnetic energy.
  • Objects (raindrops, ice, snow, birds, insects,
    terrain, and buildings) reflect that energy. Part
    of the reflected energy is received back at the
    radar. Once the radar receives the reflected
    signal, computer programs and meteorologists
    interpret the signal to determine where it is
    precipitating.

13

Radar Observatory
  • Marshall Radar Observatory itself where the main
    radar facility is located. It consists of a
    dual-wavelength, dual-polarization, Doppler
    scanning radar system. With its 9 m antenna
    sitting on top of a tower, it is one of the most
    sophisticated weather radar in the world. The
    first element of the system is a
    dual-polarization, Doppler, long wavelength
    (S-band) radar which measures the intensity, the
    velocity, and the shape of weather targets (rain,
    snow, hail, etc.) up to a range of 250 km. It is
    complemented by a shorter wavelength (X-band)
    radar and two additional receivers located
    elsewhere which help us obtain a more complete
    picture of the weather. This radar is used 24
    hours a day to monitor the storms around
    Montreal. After the radar signals have been
    processed and interpreted, the data are sent to
    the weather office and the downtown campus where
    they are made available on the web in real-time.
  • Two other radars are located in Ste-Anne de
    Bellevue. One is a small dual-polarization radar
    called X-Polito, while the other is a vertically
    pointing radar (VPR). X-Polito is a prototype
    low-cost radar developed to measure rainfall over
    short distances. The VPR is a research radar used
    primarily to study the formation of precipitation.

14
Interpreting Doppler Radar Velocities
  • To understand Doppler radial velocity patterns,
    one first has to consider the geometry of a radar
    scan. Normally the radar beam is pointed at an
    elevation angle greater than zero so that the
    beam, as it moves away from the radar, moves
    higher and higher above the surface of the earth.
    Because of this geometry, radar returns
    originating from targets near the radar represent
    the low-level wind field, while returns from
    distant targets represent the wind field at
    higher levels.

15
Interpreting Doppler Radar Velocities speed
shear wind patterns
  • On a radar PPI display, the distance away from
    the radar at the center of the display represents
    both a change in horizontal distance and a change
    in vertical distance. To determine the wind field
    at a particular elevation above the radar, one
    must examine the radial velocities on a ring at a
    fixed distance from the radar. The exact
    elevation represented by a particular ring
    depends upon the elevation angle of the radar
    beam.

16
DOPPLER
  • Doppler velocity patterns (right) correspond to
    vertical wind profiles (left), where the wind
    barbs indicate wind speed and direction from the
    ground up to 24,000 feet. Negative Doppler
    velocities (blue-green) are toward the radar and
    positive (yellow-red) are away. The radar
    location is at the center of the display
  • For this first example, wind direction is
    constant with height, but wind speed increases
    from 20 knots at the ground to 40 knots at 24,000
    feet. Note on the radial velocity field that the
    maximum inbound velocity is to the west and
    maximum outbound to the east while to the north
    and south the radar measures zero radial
    velocity. This is because the winds are
    perpendicular to the radar beam when viewed to
    the north or south.

17
dual-polarization
  • In general, weather radars send and receive
    microwaves at one polarization, usually
    horizontal. By transmitting and/or receiving
    radar waves at more than one polarization,
    additional information can be obtained on the
    nature of the targets
  • The most common dual-polarization scheme is the
    transmission and reception of horizontally and
    vertically polarized waves.

18
WSR-88D Radar Imagery detecting precipitation
  • The word radar is an acronym from "Radio
    Detection and Ranging". Radar images are useful
    for locating precipitation. As a Magnetic
    Resonance Imaging (MRI) scan examines the inside
    of a human body, a radar examines the inside of a
    cloud. A radar sends a pulse of energy into the
    atmosphere and if any precipitation is
    intercepted by the energy, part of the energy is
    scattered back to the radar. These returned
    signals, called "radar echoes", are assembled to
    produce radar images.

19
(No Transcript)
20
Radar Instrumentation
  • King City C-band doppler scanning radar
  • Portable C-Band Doppler Scanning Radar
  • Portable X-Band Doppler Scanning Radar
  • Portable 915 MHz Wind Profiler

21
Radar Instrumentation
  • Portable/airborne Ka-Band 35 GHz Cloud Radar
  • Joss-Waldvogel Disdrometer

22
RADAR IMAGES
  • REFLECTIVITY / REFLECTIVITE
  • The radar only makes measurements if sufficient
    scattering targets (eg rain, snow, etc) are
    present, although the tops of mountains are also
    frequently picked up (they can often be
    recognized by their zero velocity on the radial
    velocity image)

23
Reflectivity CAPPIIN CONVECTION
24
Interpretation of the radar reflectivity scale

Type and intensity Type and intensity Reflectivity
Drizzle or clear air targets (bugs, etc.) Drizzle or clear air targets (bugs, etc.) 0 dBZ
Very light rain or snow A few raindrops or snowflakes 10 dBZ
Light rain or snow Typical of spring/fall 1-2 mm/hr 25 dBZ
Moderate precipitation Strong for spring/fall 5 mm/hr 35 dBZ
Heavy rain Summer showers 20 mm/hr 45 dBZ
Very heavy rain or hail Peak of thunderstorms 100 mm/hr 55 dBZ
25
Reflectivity CAPPI
  • The reflectivity CAPPI (Constant Altitude Plan
    Position Indicator - radar lingo for a horizontal
    section at constant altitude - ) is the most
    often used product for displaying precipitation
    intensity around the McGill radar. It shows the
    intensity of all the echoes received by the
    radar, those we want (like precipitation) as well
    those we don't (like ground targets)
  • align"justify"In this case, a large area of
    precipitation is approaching from the North West.
    It is made of light stratiform precipitation (in
    green) with several embedded showers and
    thundershowers (in warmer colors). Some of these
    thundershowers actually spawned tornadoes

26
Surface refractivity
  • In this example, the refractivity field measured
    by radar (bottom) is contrasted with simultaneous
    weather observations over a range of 45 km. Two
    air masses can be identified, a drier one to the
    north (10C dew point temperature) and a wetter
    one to the south (14C dew point temperature).
    The refractivity computed using surface
    observations (shown in brackets in the upper
    window) match well the refractivity measured by
    radar. While the presence of a gradient in
    moisture could have been inferred from surface
    observations alone, the radar measured
    refractivity allow the precise determination of
    the position of the boundary between the two air
    masses (shown with heavy dashes).

27
McGill S-band radar
  • This radar is used for weather surveillance,
    providing data in real-time to various users
    including the local weather office, as well as
    for meteorological research and the development
    of automated algorithms of weather detection and
    identification.

28
National Weather Service Doppler Radars
29
Radar Images
  • PPI, antenin belirli bir yükseklik açisinda
    (vertical elevation) sabit tutulmasiyla elde
    edilen bir üründür. Yatayda (azimut) 0-360
    tarama yaparak elektromanyetik dalga gönderilir.
    Bu görüntüde, radarin tespit ettigi ekolarin
    reflektivite degerlerine göre radarin kaplama
    alani içerisinde yer alan hedeflerin gerçek
    koordinatlari ve varsa yagisli bölgeler
    belirlenir. Görüntünün saginda bulunan renk
    skalasi dBZ cinsinden reflektivite degerlerini
    gösterir

30
Yagisin Cinsi dBZ YagisMiktari mm/saat
           Dolu ile birlikte Yogun ve Siddetli Gürültülü Saganak Yagis 55gt gt100
           Siddetli Gök Gürültülü Saganak Yagis 50-54 51 ile 100
           Mutedil veya Siddetli Yagmur veya Karla Karisik Yagmur 45-49 26 ile 50
           Mutedil Yagmur veya  Karla Karisik Yagmur 40-44 13 ile 25
           Hafif Yagmur , Mutedil veya Kuvvetli Kar 30-39 3 ile 12
           Çok Hafif Yagmur veya Hafif Kar 15-29 0.1 ile 2.9
           Çisenti veya açik hava hedefleri (böcek,toz vb.) lt15 0 ile Iz
31
  • KIZILÖTESI

32
GÖRÜNÜR
33
Renklendirilmis
34
CONCLUSION
35
THANKS
Write a Comment
User Comments (0)
About PowerShow.com