Redler Chain and Components

1
Redler Chain and Components

• A guide to Redler Chain Matt Knight 05/01/05

2
Redler Chain and Components

• 3000 series Links
• 3000 GB series Links
• 5000 series Links
• Variations to Links Available
• Types of Flights
• Flight Variations
• Configuration
• Pins Circlips
• Manganese Runners
• Sprockets and Trailing Wheels
• Competition
• Why Buy Redler
• Enquiry Information Needed

3
3000 Series LinksFlat bottomed profile Marked
Redler Used in Most Redler Conveyors5 sizes
(Different pitches, measured by hole center)
Note Stainless Steel Links and other sizes can
be sourced The Redler 3003 Have a Bulge on the
male end so that same Sprocket flanges as 3002
can be used.
4
3000 GB Series LinksFlat bottomed profile -
Marked GBUsed by Braime and Non Redler OEMs5
sizes (Different pitches, measured by hole center)
Note Stainless Steel Links and other sizes can
be sourced
5
5000 Series LinksV bottomed profile Marked
Redler Used in Some Redler and all competitors
Conveyors3 sizes (Different pitches, measured by
hole center)
Note Stainless Steel Links and other sizes can
be sourced
6

• Variations to Links
• Through hardening Maximum Tensile Strength
• Anti wear bushes Split Type Anti Wear
  Solid Stainless Anti Corrosion (Used in
  conjunction with FHM Pins)
• Keyways Link Keywayed in Male end to
  force articulation in bushed female end.
• Significant cost implications are involvedwith
  bushed links

Link with keyway
Pin with locking pin
Hardened Bush
7
Types of Flights
8
Flight Variations
9
Flight Configurations

• Chain Configuration
• Links are assembled in a configuration to match
  individual applications.
• This configuration can include scavenger,
  cleaning or pad flights as required.
• Within a complete chain, flighted links are
  usually supplied at every single, second or third
  pitch. See sketch showing typical arrangement
  of a T type chain. Alternative configurations
  available.
• Chain is usually supplied pre-assembled into
  3-metre lengths complete with connecting pins.
• All assembled chains supplied with appropriate
  protective coating.

10
Pins and Circlips
Circlips are available as Mild Steel (standard)
or Cromweld 3Cr12 (Corrosion resistant steel)
11
Manganese Runners
Basic Info
- Used with flat bottomed Links
- Used with flat bottomed Links
- Used with V bottomed Links
MC Range Runs On Mild Steel Flat Runners
12
Sprockets and Trailers
Sprockets
Trailing Wheel

• REDLER LTD manufacture a range of quality
  sprockets and trailers to match the drop forged
  chain.
• Sprockets with or without detachable flange
  segments.
• All wearing surfaces hardened for improved life.
• All items designed with full boss that includes
  a keyway and grub screw for secure shaft
  mounting.
• All items can be supplied with high strength
  shafts.

13
Why Buy Redler ?

• Drop forged from alloy steel
• Precision machined
• Case hardened to RC57 min
• High tensile strength
• Consistent dimensional accuracy
• Manufactured to stringent quality procedures
  ISO 90012000

14
Enquiry Information Needed

• If Redler
• M/C number Qty needed
• Assembled/Not AssembledIf Non-Redler
• Pitch
• Quantity
• Type Dimension of Flight
• Configuration T1/T2/T3
• Flight additions (Scavs etc)
• Material to be handled
• Sketch
• Assembled/Not Assembled
• Finish required