Precautions 1. You should not overload your trailer hitch as it can lead to serious accidents and da

1
Class 2 Trailer Hitch Stock No. 6202 Installation
Instructions Capacity 3500 Gross Trailer Weight
300 Torque Load Read these installation
instructions to safely attach Bib Boys class
trailer hitch to your vehicle. Your safety is our
priority. Your concerns about weight capacity,
ease of installation, and appearance have been
instrumental in designing this trailer hitch.
Installation Step 1 Mark center of bumper to
align hitch to center of vehicle. Hold hitch in
position and using holes in 379 DRAWBAR ASSEMBLY
as a template, mark and drill (4) ½ diameter
holes in step bumper. Step 2 Bolt 379 DRAWBAR
ASSEMBLY to step bumper using four ½ x 1 ½ hex
bolts. Complete installation by tightening all
nuts. NOTE Do not over-tighten nuts. Proper
torque for ½ nut 50 ft. lbs.

• Information
• Use only the instructions pertaining to your car.
  Disregard all others. Should problems arise in
  the hitch installation, please take the following
  steps
• Be sure you have the right hitch for the correct
  year, make, and model car. This hitch fits Ford,
  Mazda, and Mercury small size pick-up trucks.
  Check Bib Boys Parts Catalog for a complete list
  of compatible vehicles.
• Re-read the complete installation instructions.
• Do not exceed car manufacturers limitations or
  hitch capacities. Consult your vehicle owner's
  manual for load weight.
• If problems still occur, call Bib Boy Products,
  Inc. Customer Service at 1-800-555-1212.

Parts and hardware in this package 379
Drawbar Assembly 4 each - 1 1/2 in. carriage
bolt 4 each - 1/2 in. nut 4 each - 1/2 in.
lock washer Tools needed to attach the trailer
hitch Drill Drill bit, ½ diam. Wrenches,
¼ Center punch Marker Torque wrench

• Precautions
• Do not overload your trailer hitch. It can lead
  to serious accidents and vehicle damage.
• Consult with a professional trailer hitch
  installer if you are unsure about the strength of
  your trailer hitch. Do not confuse weight
  ratings marked on towing accessories with the
  weight of your trailer hitch.
• Choose a sturdy hitch which has a number of
  accessory options. All racks for trailer hitches
  require a sturdy hitch.
• Always check for flexing of the hitch. Too much
  flexing is dangerous. It can cause load
  instability.

Bib Boy Products, Inc. 1988 This hitch complies
with Regulation V-5 and safety specifications and
requirements for connecting devices and towing
systems of the state of New York.