If you have chosen switch, keyboard or mouse controlled scanning, you might need to arrange the orde

1
How to define scan groups
1/3
1
2

• If you have chosen switch, keyboard or mouse
  controlled scanning, you might need to arrange
  the order in which buttons, rows and columns are
  scanned. This is done by editing the Scan Groups
• Go to the Welcome Display and click View
  Ready-made Displays. Select the tab Pictures and
  click on the display called Everyday.
• To edit the scan groups you must be in Setup
  View. To enter Setup View, right click anywhere
  on the display and select Setup View

Go to the Edit menu and select Scan groups.
2
How to define scan groups
2/3
This display contains four scan groups with each
4 buttons. The way these groups are organized
makes this display a column-row scanned display.
First columns are scanned and then rows are
scanned. Now we will make this display into
row-column scanned display.

• Now you see the Scan Groups dialog which is
  divided into Groups and Group content. The scan
  group column1 is highlighted and you can see all
  the buttons in this particular group in the Group
  content. You can also see that the buttons in
  this particular group is highlighted with a red
  frame on the display.

3
Start by removing the 4 scan groups by clicking
on Column1 and then click Remove below. Remove
all the groups.
Now all scan groups are empty an it would look
this way, as if this was a new display that we
were due to setup for scanning.
3
How to define scan groups
3/3
4
5
Now you are ready to try your row-column scanning
display. Press F5 to run the display.

• Now we will define the new scan groups for
  row-column scanning.
• Click New and write Row1 and click OK
• Then click on the buttons Me, Sad, Milk and Walk.

6
Tip by using the arrows on the side of the
Groups and the Group Content, you can change the
order of the scanning. If you use the left and
right arrow, you can make scan groups within a
scan group. If you plan to use auditory scanning,
it is important that you name the Scan groups
with a proper name, since groups names can be
read aloud during the auditory scanning.
Now the first scan group is ready. Repeat this
step and use the name Row2 and click on the
buttons in the second row. Repeat step this for
Row3 and Row4
Other resources How to adjust the scan settings