Aquatics Facilities - PowerPoint PPT Presentation

1 / 29
About This Presentation
Title:

Aquatics Facilities

Description:

1975 The White House gets a pool. 1979 The first true ... Gutter construction. cast-in-place. fabricated or steel. Pool filters. sand. diatomaceous earth ... – PowerPoint PPT presentation

Number of Views:748
Avg rating:5.0/5.0
Slides: 30
Provided by: Ton44
Category:

less

Transcript and Presenter's Notes

Title: Aquatics Facilities


1
Aquatics Facilities
  • Chapter 13

2
Selected Aquatic History in the USA
  • 1887 First city poolBrookline, Mass.
  • 1950s 184,200 pools in the USA
  • 1975 The White House gets a pool
  • 1979 The first true waterpark wet-n-wild
  • 2003 Excess of 6.6 million pools in USA
  • 2000-2006 The indoor waterpark industry grew
    eight fold

3
Major Growth in Aquatic Facilities
  • Came after WWII good economy plus U.S. was a
    nation of non-swimmers prior to the war and
    returned as a nation of swimmers following the
    war.
  • Traditional, competitive pools built in the
    1950s-1970s
  • Waterparks and leisure pools began in the USA in
    the mid-1980s

4
  • Leisure pools tend to recover significantly more
    income than traditional competitive pools.
  • When planning a new facility, identifying the
    priority user groups is of the utmost importance.
  • Visiting other relatively new aquatic facilities
    is strongly recommended.

5
Outdoor vs. Indoor Pools
  • Outdoor Pools less costly to construct but have a
    2-3 month season.
  • Indoor Pools more costly but are open 12 months a
    year.

6
Outdoor Pools Today
  • Need to add an abundance of shade structures
  • De-emphasize shallow water baby pools
  • and now spraygrounds instead, without standing
    water.
  • Outdoor pools use stabilized chlorines, indoor
    pools must not.

7
Competitive Pools
  • Somewhat easier to plan because dimensions are
    similar.
  • 78 81 degrees F
  • Springboards and Diving Towers need deep water
    (12.5 17 feet).
  • Wider pool decks are desired but at great expense
    because the footprint of the building is
    expanded.

8
Pool Decks/Floors
  • Tile is by far the most versatile finish but also
    the most expensive.
  • Non-slips decks are a must and must be tested
    first.
  • Fabric floor (carpet) and deck finishes are not
    recommended for wet environments
  • (mold, mildew, bacteria, etc).

9
Deck drains
  • Continuous trench drain vs. intermittent drains.
  • Keep slot drains away from pool edge possible
    contamination of pool water.
  • Deck must be sloped to drains.

10
Pool lighting (indoors)
  • 125-150 foot candles recommended for new
    facilities hosting elite competitive events
  • 100 foot candles for other competitions
  • 30-50 foot candles for recreational and
    non-competitive aquatics.
  • Should be able to switch to various light levels
    for various user groups.

11
Indoor Lighting
  • Place fixtures strategically for ease of
    replacing bulbs.
  • Bulbs lose their brilliance quickly.
  • Lights should not create glare of blind
    competitors, patrons, or lifeguards.
  • Windows/skylights add aesthetics while producing
    glare and algae if not designed and installed
    correctly.

12
Underwater Lighting
  • Often required for safety and aesthetics
  • Typically troublesome in pools leakage and
    electrocutions

13
Interior finishes
  • Tile is best by far but also most expensive.
  • Others finishes work well but stain and do not
    last as long.
  • All pool finishes must be either white or very
    light except for diving platform wells, where
    dark blue is often used.

14
Movable Floors
  • Great for increased programming
  • Expensive
  • Can require maintenance

15
Indoor Air Quality
  • Significant problem for energy efficient indoor
    pools
  • Much fresh air is needed of good air quality
  • The busier the pool, the more likely it is to
    have air-quality issues
  • ASHRAE standards may not be adequate

16
Filtration
  • Pressure vs. vacuum systems
  • Media Types
  • Sand, D.E., Cartridge, Glass, Zeolite
  • Turnovers are important usually the faster the
    turnover, the better for filtration

17
Chemistry
  • Chlorine
  • Bromine
  • Ozone
  • U/V light
  • Others (ionizers, chlorine generation, etc.)

18
Heating
  • Gas
  • Solar
  • Combination
  • others

19
Planning Leisure Aquatic Facilities
  • Leisure pool movement arrived in the U.S.
  • in the 1980s
  • Successful in Europe and Canada prior to
    acceptance in the USA, particularly indoors
  • Construction costs tend to range from 1-2
    million for small communities (8,000 sq. ft.) to
    up to 10 million for larger communities (24,000
    sq. ft.)

20
Income Generation
  • Leisure pools tend to generate more income than
    traditional pools
  • However, even the best managed leisure
  • pools have a difficult time turning a true
    profit
  • Food and beverage concessions tend to be large
    income generators at leisure pools

21
Ancillary Areas
  • Shade structures/areas
  • Sand play areas
  • Sun turf areas
  • Concessions
  • Seating areas
  • Landscaping/theming

22
Water Attractions
  • Waterslides
  • Lazy rivers
  • Water features/toys
  • Multiple pools with different temperatures

23
Trends in Water Safety
  • Supervision of the lifeguards is key
  • Video both land based and underwater
  • Drowning detection systems using both computer
    and video technology
  • Larger lifeguard stations for movement
  • 5-Minute Scanning Strategy
  • 5/30 model of Aquatic Accountability
  • AEDs, oxygen, etc.

24
Leisure Pool Features
  • Water falls
  • Fountains
  • Whirlpools
  • Current channels
  • Lazy river
  • Participatory water play apparatus

25
Leisure Pool Design Considerations
  • Cost
  • Operating costs
  • Life cycle costs
  • Long-term popularity

26
Planning Considerations for a New Swim Center
  • Need analysis
  • Programming
  • Funding
  • Future needs

27
Design Options
  • Basements
  • Pool shell construction
  • cast-in-place concrete
  • Pneumatically applied concrete
  • Structural features
  • Fenestration
  • Dehumidification
  • Materials and finishes

28
Technical Considerations
  • Dimensions
  • Interior Finishes
  • Gutter Systems
  • deep recessed
  • deck level
  • rollout
  • Gutter construction
  • cast-in-place
  • fabricated or steel
  • Pool filters
  • sand
  • diatomaceous earth
  • cartridge
  • Chemical treatment
  • Movable bulkhead
  • Movable floors
  • Diving facilities

29
Technical Considerations
  • Drainage
  • Building envelope
  • Support spaces
  • dressing rooms
  • offices
  • first aid area
  • meet management area
  • Dehumidification
  • HVAC
  • Maintenance and repair
  • Safety features
  • signage
  • safety equipment
  • safety ledges
  • recessed ladders
Write a Comment
User Comments (0)
About PowerShow.com