Recycling Used Oil - PowerPoint PPT Presentation

1 / 23
About This Presentation
Title:

Recycling Used Oil

Description:

They may accept DIY oil. Most are county agencies. ... Aggregation points bulk one owner's oil (and DIY, of course). Must meet generator requirements. ... – PowerPoint PPT presentation

Number of Views:2054
Avg rating:3.0/5.0
Slides: 24
Provided by: sfl1
Category:
Tags: diy | oil | recycling | used

less

Transcript and Presenter's Notes

Title: Recycling Used Oil


1
Recycling Used Oil in New Jersey
  • Sondra Flite,
  • Principal Environmental Specialist
  • NJ Department of Environmental
  • Protection
  • www.state.nj.us/dep/dshw
  • 2008

2
Topics
  • Where are the used oil regs?
  • Whats a used oil and what isnt?
  • How about mixtures of oil and HW?
  • Whats this rebuttable presumption that I keep
    hearing about?
  • What are the used oil specs good for?
  • What are my responsibilities as a generator?
  • Can I burn oil in my shop?
  • Can I move and consolidate my oil?
  • What are the other categories of handler?
  • FAQs

3
Feel like youre reading a foreign language?
Used oil is regulated at 40 CFR 279 and NJAC
726A-6. Generators should read NJAC
726A-6.1-6.5. Get a free non-judicial copy
from DEP, Or consultant copies, often
affordable and conveniently bound, Or the
official copy, with case law notes, from Westlaw,
at 1-800-808-9378.
4
Designed to leave oil outside HW program. Unlike
UW, UO is not presumed to be HW. It is presumed
to be destined for recycling until you dispose
of it or ship it to disposal. It doesnt count
toward your HW totals.
Generated during lube oil changes, cleanups,
inventory cleanout.
It may be cutting oil, hydraulic oil ,
compressor oil.
New Jersey classifies UO as Class D Recyclable
Material lesser requirements than HW.
5
It can be unused!
  • USEPA says its any oil refined from crude oil or
    any synthetic oil that has been used and, as a
    result of such use, is comtaminated.
  • NJDEP adds that it may also be unused oil that is
    contaminated, or that is determined to be a solid
    waste by the generator.
  • That means you can include oil that you simply
    dont intend to use.

6
NJAC 726A-6.1 Applicability
This tells you what we want to regulate, and what
we want to leave out
  • Whats in?
  • Refined, Coal, Shale, Polymers (Synthetics).
  • Used oil mixed with CESQG waste. Not best
    practice!
  • Used oil mixed with products (fuel).
  • Any oil you drain off solids.
  • The solids themselves, if they contain free
    flowing oil (rags, filters).
  • Oil that is only a D waste.

7
  • Drained materials (filters) Solid waste or scrap
    metal. Recycling is best practice.
  • Wastewater w/ minimal oil see clean water act
    (and your POTW).
  • PCBs oils see 40 C.F.R. 761.20(e).
  • Anything you dispose of solid or HW.

Whats out?
And these products
  • Reclaimed materials (re-refined oil),
  • Re-refining bottoms used in asphalt,
  • Your diesel crankase oil and diesel fuel mixed on
    site to 5 for your own vehicles.

All are Product!
And
  • Corn oil! It moves to recycling as a product.

8
Not bad so far, but read on
  • D Characteristic Oil is a used oil. (Crankcase
    oil with lead) ?
  • Oil mixed with a listed waste (261.31, 32, 33,
    38) is a HW (for instance, U228). (Solvents) ?
  • But D oil mixed with D HW, so that the
    resultant mix doesnt exhibit any characteristic,
    is still used oil. ?
  • Non-D code used oil mixed with D HW so that
    the resultant mix doesnt exhibit any
    characteristic is still used oil. ? Check with
    your destination facility!
  • And if D code oil is mixed with D001-only
    waste, and the resultant mix is not D001 but
    fails for another characteristic, its still a
    used oil. ? (This allows ignitables (mineral
    spirits) back into fuel blending.)
  • Used oil mixed with CESQG waste is Used Oil.
    Check first!

Best practice is not to mix!
9
The dreaded rebuttable presumption! (To keep you
from mixing non-oils into used oil.)
  • Oil with 1,000 ppm total halogens is presumed to
    be adulterated with a HW solvent.
  • You can rebut this presumption with testing or
    knowledge of origin (MSDSs) (Chlorinated
    paraffins, CESQG waste (not best practice), salt
    water!) May raise your costs.
  • Cutting oil moved by tolling agreements is
    exempt.
  • CFCs ? reclamation are exempt. Keep separate!

10
NJAC 726A-6.2 Used Oil Fuel Specification
If you can prove your used oil meets specs, it
may be sold as product, for any fuel purpose.
But you cant. Dont confuse this with the
Rebuttable Presumption ! Pretend you never saw
it.
Arsenic 5 ppm Lead 100 ppm Cadmium..2
ppm Flash point..100F Chromium10
ppm Halogens 1,000 ppm USEPA allows 4000ppm.

726A-6.3 Prohibitions
  • Surface impoundments or waste piles,
  • Burning off-spec oil in commercial boilers
  • Burning on-spec oil in a home/institution/
    unapproved space heater,
  • Use for dust suppression.
  • Oil is not asphalt!

11
726A-6.4 Generators
6.4(a) Who are they?
  • They are sites, not people that
  • Remove oil,
  • Ship it to disposal or recycling,
  • Spill it.
  • They are not
  • DIYs,
  • Diesel Crankcase blenders,
  • Farmers who generate

6.4(b) Whats not allowed?
  • Transporting other peoples oil
  • Disposing
  • Refining or burning or marketing to others

6.4 (c) Liability
  • Youre responsible for contamination in the oil
    you ship off site.

12
726A-6.4(d)1 Cross-references
  • SPCC requirements, N.J.A.C. 71E,
  • Federal Clean Air Act, and NJAC 727,
  • UST requirements of N.J.A.C. 714B
  • 726A-6.4(d)2-5 Storage
  • Drums or Tanks in good condition
  • Check for leaks rust,
  • Label tanks and fill pipes used oil.
  • Upon detection of release
  • Stop the release
  • Contain the released oil
  • Properly manage oil and other materials and
  • Repair or replace containers .

13
What the heck does 726A-6.4(d)5 mean?
  • Call the hotline as soon as possible
  • Tell them what happened.
  • Tell them where you are.
  • Ask what time they are recording the incident,
    for your records, and
  • The name of the duty officer.
  • Clean it up or call a contractor. Dont wait for
    emergency responders. They may join you there.
  • Make repairs if needed.
  • Keep a record of what you did.
  • Send us the generator copy of the manifest, if
    any.

14
How much may I keep on site, and how long may I
keep it?
As much as you like, for as long as you like.
But
SPCC Plan needed at 1320g. DPCC Plan needed at
200,000g.
15
Secondary Containment
  • We recommend it.

Spills that remain inside the containment are
not releases. Dont call us.
16
Absorbent materials
Put them where your staff can get at them.
17
726A- 6.4(e) Burning used oil in space heaters
without permits.
  • Dont just add it to your old boiler!
  • Register with the air program.
  • Total combined heat input 500,000 BTU/hr
    (about3.5 gallons per hour).
  • Only your used oil, generated on site.
  • On-spec oil.
  • Annual tune-up and emissions check.
  • UL-tested units.
  • Youll need to keep records.
  • Only automotive oils are allowed.
  • Burn only in the shop.
  • To exceed this, speak to the Air
  • Quality Program, at 609-984-3019,
  • about permitting options.

18
6.4(f) Choosing a Transporter
  • Use a transporter with an EPA ID . Practically
    speaking, you use HW haulers.
  • Carry 55 gallons of your own, without EPA ID ,
    in your vehicle, to collector or aggregation
    point that you operate. Dont placard.
  • Tolling transporter needs no EPA ID .
  • You may choose to keep samples of each load to
    protect yourself.
  • Contracts are optional.
  • Try to get paid.
  • Keep bills of lading!

19
NJAC 726A-6.5 Collection and AggregationTaking
DIY oil and combining loads.
  • Collection centers accept store. They may
    accept DIY oil. Most are county agencies.
  • They register and post a sign USED OIL
    COLLECTION CENTER RECYCLE YOUR USED MOTOR OIL
    HERE plus any limit and fee.
  • Aggregation points bulk one owners oil (and DIY,
    of course).
  • Must meet generator requirements.
  • May move up to 55 g. in your own trucks.
  • You may be required by law to be a collection
    center!

20
  • State law says
  • retail service stations w/ UO tanks
    reinspection stations permitted by DMV
  • shall take DIY oil,
  • shall post an 11x15 sign,
  • but may reject tainted oil, and
  • may set a 2 gallons limit, and
  • may charge a fee to cover costs.
  • State law also says
  • DIYs must deliver it pure, during business hours.
  • Marketers must advertise that oil is recyclable.
  • We advise
  • Visually inspect it, place it in the tank
    yourself
  • Download our guide to collecting used oil.

21
Who are the other handlers?How do they differ
from generators?
  • 726A-6.8 Burners
  • Industrial boilers (not commercial boilers)
  • Fuel tracking
  • 726A-6.9 Marketers (if they exist)
  • Must do analysis
  • recordkeeping
  • 726A-6.6 Transporters and Transfer stations
  • A-901 registration
  • 35 day limit.
  • 726A-6.7 Processors
  • Preparedness and prevention
  • Permits
  • Closure plans

22
FAQs from the Regulated Community
  • Non-terne plated filters are exempted if you
    hot-drain after crushing, dismantling, or
    puncturing the anti-drain back valve or the dome.
    (12 Hrs at 68ºF).
  • Parts washer fluid isnt used oil. Its solvent.
    You need to classify as HW or ID 72. You may
    test or use process knowledge.
  • How can I easily get a big fat fine?
  • Mislabel your tanks and fill pipes HW, Waste
    oil, or nothing.
  • Leave big spill marks around fill pipes.
  • Put brake cleaner in your oil.
  • Run an illegal space heater.

Ask for a courtesy visit!
23
Still Feel Nervous?
Ask your friendly regional inspector for a
courtesy visit.
www.state.nj.us/dep/dshw www.state.nj.us/dep/
enforcement/ca-intro.html
Write a Comment
User Comments (0)
About PowerShow.com