MAE 4261: AIRBREATHING ENGINES - PowerPoint PPT Presentation

1 / 17
About This Presentation
Title:

MAE 4261: AIRBREATHING ENGINES

Description:

General expression that relates the thrust of a propulsion system to the net ... PROPULSIVE EFFICIENCY FOR DIFFERENT ENGINE TYPES [Rolls Royce] 12 ... – PowerPoint PPT presentation

Number of Views:145
Avg rating:3.0/5.0
Slides: 18
Provided by: danielro
Category:

less

Transcript and Presenter's Notes

Title: MAE 4261: AIRBREATHING ENGINES


1
MAE 4261 AIR-BREATHING ENGINES
  • Air-Breathing Engine Performance Parameters
  • and Future Trends
  • September 1, 2009
  • Mechanical and Aerospace Engineering Department
  • Florida Institute of Technology
  • D. R. Kirk

2
LECTURE OUTLINE
  • Review
  • General expression that relates the thrust of a
    propulsion system to the net changes in momentum,
    pressure forces, etc.
  • Efficiencies
  • Goal Look at how efficiently the propulsion
    system converts one form of energy to another on
    its way to producing thrust
  • Overall Efficiency, hoverall
  • Thermal (Cycle) Efficiency, hthermal
  • Propulsive Efficiency, hpropulsive
  • Specific Impulse, Isp s
  • (Thrust) Specific Fuel Consumption, (T)SFC
    lbm/hr lbf or kg/s N
  • Implications of Propulsive Efficiency for Engine
    Design
  • Trends in Thermal and Propulsive Efficiency

3
FLUID MECHANICS DERIVATION OF THRUST EQUATION
Chemical Energy
Thermal Energy
Kinetic Energy
  • Flow through engine is conventionally called
    THRUST
  • Composed of net change in momentum of inlet and
    exit air
  • Fluid that passes around engine is conventionally
    called DRAG

4
THERMODYANMICS BRAYTON CYCLE MODEL
  • 1-2 Inlet, Compressor and/or Fan Adiabatic
    compression with spinning blade rows
  • 2-3 Combustor Constant pressure heat addition
  • 3-4 Turbine and Nozzle Adiabatic expansion
  • Take work out of flow to drive compressor
  • Remaining work to accelerate fluid for jet
    propulsion
  • Thermal efficiency of Brayton Cycle, hth1-T1/T2
  • Function of temperature or pressure ratio across
    inlet and compressor

5
P-V DIAGRAM REPRESENTATION
  • Thermal efficiency of Brayton Cycle, hth1-T1/T3
  • Function of temperature or pressure ratio across
    inlet and compressor

6
EXAMPLE OF LAND-BASED POWER TURBINE GENERAL
ELECTRIC LM5000
  • Modern land-based gas turbine used for electrical
    power production and mechanical drives
  • Length of 246 inches (6.2 m) and a weight of
    about 27,700 pounds (12,500 kg)
  • Maximum shaft power of 55.2 MW (74,000 hp) at
    3,600 rpm with steam injection
  • This model shows a direct drive configuration
    where the LP turbine drives both the LP
    compressor and the output shaft. Other models can
    be made with a power turbine.

7
EFFICIENCY SUMMARY
  • Overall Efficiency
  • What you get / What you pay for
  • Propulsive Power / Fuel Power
  • Propulsive Power TUo
  • Fuel Power (fuel mass flow rate) x (fuel energy
    per unit mass)
  • Thermal Efficiency
  • Rate of production of propulsive kinetic energy /
    fuel power
  • This is cycle efficiency
  • Propulsive Efficiency
  • Propulsive Power / Rate of production of
    propulsive kinetic energy, or
  • Power to airplane / Power in Jet

8
PROPULSIVE EFFICIENCY AND SPECIFIC THRUST AS A
FUNCTION OF EXHAUST VELOCITY
Conflict
9
COMMERCIAL AND MILITARY ENGINES(APPROX. SAME
THRUST, APPROX. CORRECT RELATIVE SIZES)
GE CFM56 for Boeing 737 T30,000 lbf, a 5
  • Demand higher efficiency
  • Fly at lower speed (subsonic, M8 0.85)
  • Engine has large inlet area
  • Engine has lower specific thrust
  • Ue/Uo ? 1 and hprop ?
  • Demand high T/W
  • Fly at high speed
  • Engine has small inlet area (low drag, low radar
    cross-section)
  • Engine has high specific thrust
  • Ue/Uo ? and hprop ?

PW 119 for F- 22, T35,000 lbf, a 0.3
10
EXAMPLE SPECIFIC IMPULSE
SSME
PW4000 Turbofan
  • Airbus A310-300, A300-600, Boeing 747-400,
    767-200/300, MD-11
  • T 250,000 N
  • TSFC 17 g/kN s 1.7x10-5 kg/Ns
  • Fuel mass flow 4.25 kg/s
  • Isp 6,000 seconds
  • Space Shuttle Main Engine
  • T 2,100,000 N (vacuum)
  • LH2 flow rate 70 kg/s
  • LOX flow rate 425 kg/s
  • Isp 430 seconds

11
PROPULSIVE EFFICIENCY FOR DIFFERENT ENGINE TYPES
Rolls Royce
12
OVERALL PROPULSION SYSTEM EFFICIENCY
  • Trends in thermal efficiency are driven by
    increasing compression ratios and corresponding
    increases in turbine inlet temperature
  • Trends in propulsive efficiency are due to
    generally higher bypass ratio

13
FUEL CONSUMPTION TREND
  • U.S. airlines, hammered by soaring oil prices,
    will spend a staggering 5 billion more on fuel
    this year or even a greater sum, draining already
    thin cash reserves
  • Airlines are among industries hardest hit by high
    oil prices.
  • Example Airline stocks fell at the open of
    trading Tuesday as a spike in crude-oil futures
    weighed on the sector

JT8D
Fuel Burn
JT9D
PW4084
Future Turbofan
PW4052
NOTE No Numbers
1950
1960
1970
1980
1990
2000
2010
2020
Year
14
CRUISE FUEL CONSUMPTION vs. BYPASS RATIO
15
SUBSONIC ENGINE SFC TRENDS(35,000 ft. 0.8 Mach
Number, Standard Day Wisler)
16
AEROENGINE CORE POWER EVOLUTION DEPENDENCE ON
TURBINE ENTRY TEMPERATURE Meece/Koff
17
PRESSURE RATIO TRENDS (Janes 1999)
Write a Comment
User Comments (0)
About PowerShow.com