Title: The Smart Card Logger Self Guided Tour of the QC1 Reader
1The Smart Card LoggerSelf Guided Tour of the
QC-1 Reader
Click here to begin
2Start the QC-1
Click here to Turn On the QC-1
3Click on buttons to operate the QC-1
Go Back
4Main QC-1 Menu Screen
Click on SELECT to review DATA goes directly to
most recent tag data set
battOK refers to the QC-1 battery, not to a tag
battery
5Click on buttons to operate the QC-1
Go Back
6Main QC-1 Menu Screen
Click on SELECT to review STATS shows
information on number of tags stored, etc.
7Click on buttons to operate the QC-1
Go Back
8Stats Screen 1
STATS Selected
Displays the number of tag records stored in QC-1
memory and how many of these records have alarms
Return to Main Menu
Click on SELECT to view next STATS screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
9Click on buttons to operate the QC-1
Go Back
10Stats Screen 2
STATS Selected
Displays Firmware Version number This screen is
only used for reference in issues involving
TurboTag Technical Support.
Return to Main Menu
Click on SELECT to view next STATS screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
11Click on buttons to operate the QC-1
Go Back
12Stats Screen 3
STATS Selected
Permits all tag records to be erased from QC-1
memory
Return to Main Menu
Click on SELECT to view next STATS screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
13Click on buttons to operate the QC-1
Go Back
14(No Transcript)
15Printing a Chart
Using TurboTag QC-1 Reader
Click to Continue
16Printing a Chart
Using TurboTag QC-1 Reader
- Max Min Alarms
- Time over Maximum
- Time under Minimum
- Average Temp (MKT)
- Start Time
- Full Graph
- Unique Session ID
Return to Main Menu
17Main QC-1 Menu Screen
Click on SELECT to review SETUP parameters to
control the way QC-1 displays data
18Click on buttons to operate the QC-1
Go Back
19Setup Screen 1
SETUP Selected
Displays time zone relative to GMT This can be
reset using the Arrow (lt or gt) buttons for
higher or lower GMT
Return to Main Menu
Click on SELECT to view next SETUP screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
20Click on buttons to operate the QC-1
Go Back
V2
21Setup Screen 2
SETUP Selected
Displays Daylight Savings ON/OFF status This can
be reset using the Arrow (lt or gt) buttons for
ON/OFF
Return to Main Menu
Click on SELECT to view next SETUP screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
22Click on buttons to operate the QC-1
Go Back
V2
23Setup Screen 3
SETUP Selected
Displays temperature units status C or F This
can be reset using the Arrow (lt or gt) buttons
for switching units
Return to Main Menu
Click on SELECT to view next SETUP screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
24Click on buttons to operate the QC-1
Go Back
V2
25Setup Screen 4
SETUP Selected
Displays ON/OFF status for automatic tag
stopping This can be switched using the Arrow (lt
or gt) buttons for ON/OFF
Return to Main Menu
Click on SELECT to view next SETUP screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
26Click on buttons to operate the QC-1
Go Back
V2
27Setup Screen 5
SETUP Selected
Displays averaging function that is active This
can be switched using the Arrow (lt or gt) buttons
for simple mean or MKT
Return to Main Menu
Click on SELECT to view next SETUP screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
28Click on buttons to operate the QC-1
Go Back
V2
29Setup Screen 6
SETUP Selected
Displays status of shelf life function This can
be switched using the Arrow (lt or gt) buttons for
YES/NO
Return to Main Menu
Click on SELECT to view next SETUP screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
30Click on buttons to operate the QC-1
Go Back
V2
31Setup Screen 7
SETUP Selected
Displays alarm level for the shelf life
parameter This value can be set up and down using
the Arrow (lt or gt) buttons
Return to Main Menu
Click on SELECT to view next SETUP screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
32Click on buttons to operate the QC-1
Go Back
V2
33Setup Screen 8
SETUP Selected
Displays ON/OFF status for sound signals This can
be switched using the Arrow (lt or gt) buttons for
ON/OFF
Return to Main Menu
Click on SELECT to view next SETUP screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
34Click on buttons to operate the QC-1
Go Back
35Data Screen 1
DATA Selected
For selected tags, displays tag number, ON/OFF
status, current temperature, number of data
points, and number of active alarms
Return to Main Menu
Click on SELECT to view next DATA screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
Click to PRINT a chart using MP-1 printer
36Click on buttons to operate the QC-1
Go Back
37Data Screen 2
DATA Selected
Displays which alarms are active Active alarm
type will blink on screen (Tmax in this example)
Return to Main Menu
Click on SELECT to view next DATA screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
Click to PRINT a chart using MP-1 printer
38Click on buttons to operate the QC-1
Go Back
39Optional Shelf Life Alarm
DATA Selected
Displays which alarms are active (includes SL
alarm if option is activated) Active alarm type
will blink on screen (Tmax in this example)
Return to Main Menu
Click on SELECT to view next DATA screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
Click to PRINT a chart using MP-1 printer
40Click on buttons to operate the QC-1
Go Back
41Data Screen 3
DATA Selected
Displays Session ID Number this is a unique
identifier of a tag
Return to Main Menu
Click on SELECT to view next DATA screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
Click to PRINT a chart using MP-1 printer
42Click on buttons to operate the QC-1
Go Back
43Optional Shelf Life Screen
DATA Selected
Displays remaining shelf life in days and
compares to Setting Flashes if shelf life is less
than Setting (example shown here)
Return to Main Menu
Click on SELECT to view next DATA screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
Click to PRINT a chart using MP-1 printer
44Click on buttons to operate the QC-1
Go Back
45Data Screen 4
DATA Selected
Compares actual measured Tmax with pre-set Tmax
setting Alarm value will blink (example shown
here)
Return to Main Menu
Click on SELECT to view next DATA screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
Click to PRINT a chart using MP-1 printer
46Click on buttons to operate the QC-1
Go Back
V2
47Data Screen 5
DATA Selected
Compares actual measured Tmin with pre-set Tmin
setting Alarm value will blink
Return to Main Menu
Click on SELECT to view next DATA screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
Click to PRINT a chart using MP-1 printer
V2
48Click on buttons to operate the QC-1
Go Back
49Data Screen 6
DATA Selected
Compares actual measured Tavg with pre-set Tavg
setting Alarm value will blink
If MKT was selected, MKT values are displayed in
this screen
Return to Main Menu
Click on SELECT to view next DATA screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
Click to PRINT a chart using MP-1 printer
50Click on buttons to operate the QC-1
Go Back
51Data Screen 7
DATA Selected
Displays Start Date and Start Time for the
selected tag
Return to Main Menu
Click on SELECT to view next DATA screen
With actual QC-1, Return to Main Menu by press
and hold of SELECT button
Click to PRINT a chart using MP-1 printer
52Click on buttons to operate the QC-1
Go Back
53(No Transcript)
54Reading a T-700 TurboTag
Using TurboTag QC-1 Reader
Return to Main Menu
55(No Transcript)
56Sending TurboTag Data to a PC
Using TurboTag QC-1 Reader
- Press SEND button
- QC-1 Screen indicates connection
- Software confirms data capture
- All data is erased in QC-1 at completion
Max 6 inches (15 cm)
Return to Main Menu
PC IR Port