TVS Protection for Wireless Systems - PowerPoint PPT Presentation

1 / 17
About This Presentation
Title:

TVS Protection for Wireless Systems

Description:

Clamping Voltage of SMDA05LCC. Test Pulse: 10 kV, 1/30 ns (waveshape) 20 V/div ... Max. Clamping Voltage (VC) Capacitance (C) Circuit & Threat Conditions ... – PowerPoint PPT presentation

Number of Views:43
Avg rating:3.0/5.0
Slides: 18
Provided by: microso158
Category:

less

Transcript and Presenter's Notes

Title: TVS Protection for Wireless Systems


1
TVS Protection forWireless Systems
By David W. Hutchins March 2000
2
Protection is Requiredat All Levels
  • Circuits
  • Equipment
  • Systems

3
Typical Systems
  • Portable Telecommunications
  • Handheld Devices
  • Wireless Phones
  • Base Stations

4
TVS Components are Needed for
  • Smaller, Sensitive IC Components
  • Lightning Strikes
  • Lower Voltage ESD Failures
  • EMC Standards (Enxxxx)

5
Design Considerationsfor TVS Protection are
  • PCB Layout (Traces, Vias, etc.)
  • Grounding Bonding (Return Paths)
  • Shielding
  • Protection Components

6
Typical Interfacewith Single or Multiple I/O
Ports
  • Plug-n-play Ports
  • Antennas (Bluetooth)
  • IC Components for Display
  • Base Stations

7
Major TVS Locations for TVS Protection
  • I/O Ports
  • Power Bus
  • Ground

8
Key TVS Component Parameters
Purpose
Parameter / Test Condition
  • Selection
  • Application
  • Protection

IP _at_ td C _at_ f
VC _at_ IP
9
Selection Parameters IP vs td
Compare the threat test conditions to TVS
parameters Peak Pulse Transient Current It
IPP Pulse Time tduration td (20 or 1000 µs)
10
Application ParametersC vs f
1000
100
C - Capacitance - pF
10
1.0
10KHz 100KHz 1MHz
10MHz 100MHz
1000MHz
f - Frequency - Hz
11
Protection Parameter Vc vs IpExample
ESD (HBM) Pulse
20 V/div
Clamping Voltage of SMDA05LCC Test Pulse 10 kV,
1/30 ns (waveshape)
12
Review of Major TVS Parameters for comparison
selection
Circuit Threat Conditions Operating Line
Voltage (VOL) Transient Impulse Current (It)
IC Component Threshole Voltage (VFT)
Frequency (F)
  • TVS Parameters to
  • Stand-off Voltage (VWM)
  • Peak Pulse Current (IPP)
  • Max. Clamping Voltage (VC)
  • Capacitance (C)

13
Transient Voltage Suppressor Components
  • Avalanche Breakdown Diode (ABD) PCB / Data Bus
    Lines
  • ANSI C62.35, IEC 61647-2
  • Thyristor Surge Suppressor (TSS) Telecom / Power
    Cross
  • ANSI C62.37, IEC 61647-4
  • Steering Diode (SD) Arrays High Speed I/O Ports
  • TVS / Filter Combination PCB / Data Lines
  • Multi-functional Low Capacitance High Speed I/O
    Port Arrays

14
Suggested TVS Series for Wireless systems
PSOTxxLC PLCDAxx SMDAxxLCC PSLCxxC
SM16LCxxC P0402FCxxC PSR05C PSDxx
15
Suggested TVS devices for Base Stations
15KPAxx 30KPAxx PPxxxxSC PPxxx1SC GPZ532
GPZ1275
16
Future Wireless TVS Components will have ...
  • Smaller Packages
  • Multi-functions
  • Lower Cost
  • Higher Level of Integration

17
Summary
Protection requires...
  • Close Inspection of
  • Compliance Standards
  • System Certification
  • Selected parameters of
    TVS components
Write a Comment
User Comments (0)
About PowerShow.com