AGATA ancillary detectors and ancillary detector integration group - PowerPoint PPT Presentation

About This Presentation
Title:

AGATA ancillary detectors and ancillary detector integration group

Description:

Construction of the necessary electronics to guarantee the correct coupling of ... Front pannel I/O. VME GTS Interface: schematic block diagram (Trigger input etc... – PowerPoint PPT presentation

Number of Views:103
Avg rating:3.0/5.0
Slides: 18
Provided by: npgD
Category:

less

Transcript and Presenter's Notes

Title: AGATA ancillary detectors and ancillary detector integration group


1
AGATA The Advanced Gamma Ray Tracking Array
Ancillary Detector and Integration W.G.
Status of the Working Group and Tasks A.Gadea
2
  • Purpose coordination of the use and integration
    of ancillary devices in AGATA.
  • Demonstrator phase
  • Identification of existing ancillary devices
    necessary to demonstrate the feasibility of using
    a tracking array in different experimental
    conditions.
  • Construction of the necessary electronics to
    guarantee the correct coupling of the ancillary
    and AGATA Demonstrator electronics.
  • Coordinate the ancillary devices mechanical
    integration
  • Evaluate the impact of the ancillary detector in
    the AGATA performance.

3
  • TASKS
  • Ancillary detectors for the key experiments and
  • AGATA demonstrator tests. (N.Redon)
  • Electronics and data acquisition integration.
  • (Ch.Theisen)
  • Ancillary detector impact on the AGATA
    performances. (No chairman)
  • Mechanic integration of ancillary detectors in
  • AGATA. (No chairman)

4
  • MEETINGS OF THE W.G.
  • Start meeting May 16th-17th 2003
  • Definition of tasks
  • AGATA Week September 15th-19th 2003
  • First concepts of integration of the electronics
  • Impact of ancillary devices on AGATA
  • W.G. Meeting June 22th 2004
  • Interaction with the AGATA GTS (latency!)
  • Ancillary devices for the Demonstrator phase
  • Electronics and data acquisition TASK meeting
  • 17th November 2004
  • Starting the specifications for an ancillary
    electronics GTS interface.

5
  • TASK STATUS AND LINKS
  • Ancillary detectors for the key experiments.
    (N.Redon).
  • Link with DATA ANALYSIS W.G. Key experiments
    task
  • Identification of Facilities and ancillary
    instruments to
  • prove the AGATA Demonstrator.
  • Document on demonstration scheduling, done in
  • collaboration with the key experiments task,
    will be
  • available soon .
  • Meeting Wednesday 1400 (N.Redon/E.Farnea)

6
Scheduling for the AGATA modules and Demonstrator
tests
  • Test of symmetric capsules 2004-2005
  • In beam test of the symmetric cluster June 2005?
  • (if 108 sampling ADC channels are
    available)
  • Test in different labs of the symmetric and
    asymmetric capsules 2005-2006
  • Demonstration campaigns Starting at end 2006-
    early 2007
  • Debugging the full/partial Demonstrator
  • Low v/c (lt0.1) beam demonstration campaign
  • Medium v/c (0.3) beam demonstration campaign
  • High v/c (gt0.3) beam demonstration campaign
  • Radioactive beams test (background conditions)
  • Tagging demonstration campaign

7
Proposed Demonstration sites
  • GSI Demonstrator at FRS
  • LNL Demonstrator PRISMA
  • GANIL Demonstrator VAMOS (and may be with SPEG)
  • JYFL Demonstrator RITU
  • IKP KÖLN Demonstrator ancillaries

and devices
  • LUSIA Lund Si-strip detectors
  • Recoil filter detector (RFD)
  • Neutron Wall
  • The CUP detector

8
  • TASK STATUS AND LINKS
  • Electronics and data acquisition integration .
    (Ch.Theisen)
  • Link with Data Processing W.G. GTS task and DAQ
  • task.
  • Document on specification of the Ancillary GTS
  • interface (draft) distributed
  • Team engineers from Krakow, GANIL, Daresbury,
  • Padova, working on the specifications and
  • electronic design
  • Technical Ancillary-GTS Meeting Tuesday 1400
    (Ch.Theisen)

9
VME GTS Interface schematic block diagram
(Trigger input etc)
standard TDR interfacing
10
Specifications
  • Backward compatibility with VME/VXI based ADC and
    readout fornt ends
  • Full compatibility with the AGATA GTS mezzanine
  • It will work with the Trigger-request / Trigger
    acceptance protocol
  • Will provide the interfacing with TDR systems
    (required for tagging setups)

11
  • TASK STATUS AND LINKS
  • Ancillary detector impact on AGATA performances.
    (No chairman)
  • Link with DATA ANALYSIS W.G. simulation of Key
  • experiments task
  • Impact of the different ancillary instrument into
    the
  • AGATA performances (only done for few cases).
  • See contribution of E.Farnea on Wednesday
    morning simulation of the impact of EUCLIDES

12
  • TASK STATUS AND LINKS
  • Mechanical integration of ancillary detectors and
    devices . (No chairman)
  • Link with Infrastructure W.G.
  • Coordination required due to the start of the
    test
  • campaigns.
  • Integration of ancillaries in early
    pre-Demonstrator
  • campaigns.

13
(No Transcript)
14
Experimental activity proposal
key-experiments ancillary devices
teams
  • Binary Reactions (Coulomb excitation,
    quasi-elastic reactions, etc...)
  • Feasibility of tracking with Doppler corrections
    for v/c lt 0.1
  • Large scattering angle for the products
  • Reconstruction of low multiplicity "simple"
    spectra.
  • Reactions close to the Coulomb barrier
    (Fusion-Evaporation reactions / Deep Inelastic
    Collisions)
  • Tracking with 0 degree recoils
    (Fusion-Evaporation reactions).
  • Tracking with high multiplicity and large
    scattering angle for the products (Deep
    Inelastic)
  • High spin, reconstruction of high multiplicity
    spectra.
  • GDR and high energy gamma detection
    (Fusion-evaporation at the limits of angular
    momentum).
  • Tracking efficiency for high energy gammas
  • Explore the reconstruction on non-Compton
    processes (pair production)
  • Medium and high v/c reactions with stable
    (knock-out, fragmentation and relativistic
    Coulomb excitation)
  • Feasibility of tracking with Doppler corrections
    for v/c gtgt 0.1
  • Low gamma multiplicity at large v/c (Coulomb
    excitation or knock-out)
  • Large gamma multiplicity at large v/c
    (fragmentation)

15
Experimental activity proposal
key-experiments ancillary devices
teams
  • High intensity stable beams (tracking at extreme
    counting rates)
  • Low multiplicity (Coulomb excitation,
    quasi-elestic collisions etc...)
  • High multiplicity (Fusion-Evaporation reactions /
    Deep Inelastic Collisions)
  • Proton-rich nuclides, medium spin, v/c0,
    (tracking with a compact array)
  • RIB Close to the coulomb barrier
  • Define the sensitivity limits of the array
  • Explore the behaviour of the array under high
    radioactive background conditions
  • Check the techniques for background reduction
  • Low, medium and high v/c reactions with RIB's
  • Define the sensitivity limits of the array
  • Explore the behaviour of the array under high
    beam background conditions
  • Check the high energy hadronic background effects
  • b-decay and isomer decay studies.
  • Effects of the de-localized annihilation of the
    positron (b decay).
  • Effects of a large area gamma source.

16
Low Energy reaction mechanisms
  • Coulomb excitation (Coulex) and Inelastic
    scattering.
  • Transfer and quasi-elastic processes.
  • Multi-nucleon transfer.
  • Deep Inelastic Collisions.
  • Quasi-fusion reactions.
  • Fusion evaporation.
  • Fusion-fission.

17
High energy reaction mechanisms
Relativistic (single step) Coulomb
excitation Knockout reactions Fragmentation
reactions
  • Cross sections
  • up to1 barn for Coulex (large Z nuclei)
  • tens of mbarn for 1 nucleon knockout,
  • down to few mb for 2 nucleons knockout.
Write a Comment
User Comments (0)
About PowerShow.com